{"title":"Accessories","description":"\u003cp\u003eAccessories connect the ground system to the air platform and adapt it to the surface in front of you.\u003c\/p\u003e\n\n\u003ch2\u003eHoses and reels\u003c\/h2\u003e\n\u003cp\u003eReinforced high-pressure supply hoses and reels. \u003cstrong\u003eBore and length directly determine the pressure and temperature that actually reach the nozzle\u003c\/strong\u003e — hose selection affects cleaning performance as much as the equipment being connected.\u003c\/p\u003e\n\n\u003ch2\u003eNozzles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJet and fan nozzles\u003c\/strong\u003e — general facade and glass cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbo nozzles\u003c\/strong\u003e — rotating jet for heavier soiling on stone and concrete.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam nozzles\u003c\/strong\u003e — solution application and dwell time on vertical surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar panel nozzles\u003c\/strong\u003e — low-impact rinsing for panel surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCouplings and wear parts\u003c\/h2\u003e\n\u003cp\u003eQuick-connect couplings, adapters and seals. \u003cem\u003eNozzles and seals are consumable and require periodic replacement.\u003c\/em\u003e\u003c\/p\u003e","products":[{"product_id":"skyhose-6-aramid-reinforced-drone-hose","title":"WasherDrone SkyHose 6 — 1\/4 in Aramid-Reinforced Drone Hose","description":"\u003cp\u003eThe SkyHose 6 is the high-pressure supply line between the ground system and the drone-mounted lance. It is built on a 1\/4 in aramid-reinforced hose rated at 225 bar (3,260 psi) with a 4:1 safety factor. Aramid reaches this pressure class at 82 g\/m (5.5 lb \/ 100 ft), where a textile-braided equivalent is heavier — and the aircraft lifts both the hose and the water inside it. Both ends carry a crimped union and a stainless steel quick-connect: male in, female out.\u003c\/p\u003e\n\u003cp\u003eThe drone does not do the work. The drone carries the nozzle to height. The ground system does the work.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAramid, not textile.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA single aramid braid carries 225 bar (3,260 psi) at 82 g\/m (5.5 lb \/ 100 ft) — strength-to-weight that stays airborne for the full working height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePayload you can calculate.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHose and water are published separately: 114 g per metre suspended, water included. The lifted mass is a number, not an estimate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated end to end.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe couplings are rated 300 bar (4,350 psi), above the hose itself, so the assembly is limited by the hose at 225 bar (3,260 psi) rather than by a fitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel wet path.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCouplings and unions are stainless throughout, so the line introduces no metals into water fed from a reverse-osmosis stage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eThe hose sits between the ground system outlet and the drone-mounted lance. Polarity is fixed across the WasherDrone range and follows the same logic as a power socket: water enters through a male fitting and leaves through a female one, so a line cannot be connected the wrong way round.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect at the ground:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe male inlet mates with the female outlet on the ground system — SkyJet, SkyControl, or your own pump unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun and lift:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePay the hose out from the reel as the aircraft climbs. Every extra metre aloft is lifted mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect at the lance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe female outlet receives the male inlet of the lance. Seat both couplings before pressurising.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eHose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner diameter\u003c\/td\u003e\n\u003ctd\u003e6.35 mm (1\/4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e11.4 mm (0.45 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolyurethane cover, single-layer aramid braid, polyester liner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking pressure\u003c\/td\u003e\n\u003ctd\u003e225 bar (3,260 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBurst pressure\u003c\/td\u003e\n\u003ctd\u003e900 bar (13,050 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety factor\u003c\/td\u003e\n\u003ctd\u003e4:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. bend radius\u003c\/td\u003e\n\u003ctd\u003e100 mm (4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose weight\u003c\/td\u003e\n\u003ctd\u003e82 g\/m (5.5 lb \/ 100 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eAssembly and connections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd fittings\u003c\/td\u003e\n\u003ctd\u003eCrimped union, both ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInlet coupling\u003c\/td\u003e\n\u003ctd\u003eQuick-connect, male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet coupling\u003c\/td\u003e\n\u003ctd\u003eQuick-connect, female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoupling material\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoupling size\u003c\/td\u003e\n\u003ctd\u003e1\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoupling rating\u003c\/td\u003e\n\u003ctd\u003e300 bar (4,350 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembly rating\u003c\/td\u003e\n\u003ctd\u003e225 bar (3,260 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eIn service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. reel drum diameter\u003c\/td\u003e\n\u003ctd\u003e200 mm (7.9 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eDrone-based façade and exterior cleaning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eModels\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 m \/ 98 ft\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— WD-L2-SHS-06-030 (Reinforced drone hose 1\/4 in, 30 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 m \/ 164 ft\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— WD-L2-SHS-06-050 (Reinforced drone hose 1\/4 in, 50 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 m \/ 328 ft\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— WD-L2-SHS-06-100 (Reinforced drone hose 1\/4 in, 100 m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat’s included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSkyHose 6 hose assembly in the selected length\u003c\/li\u003e\n\u003cli\u003eCrimped unions, both ends\u003c\/li\u003e\n\u003cli\u003eStainless steel quick-connects — male inlet, female outlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you deploy\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe hose sets the assembly pressure.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe quick-connects are rated 300 bar (4,350 psi) and the hose 225 bar (3,260 psi), so the hose is the limiting component and the assembly rating is 225 bar (3,260 psi). Operate within that figure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRespect the bend radius.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMinimum bend radius is 100 mm (4 in), so reel drums must be at least 200 mm (7.9 in) in diameter. Tighter coiling permanently damages the reinforcement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLifted mass grows with height.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMatch the deployed length to the working height. The ground system and the lance are separate products and are not included; the lance adds its own mass in the air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore and after each run.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSeat and lock both quick-connects before the pump is started, and depressurise before disconnecting. Rinse, drain, and store coiled at or above the minimum bend radius, out of direct sunlight. Inspect the cover for abrasion at every deployment.\u003c\/p\u003e\n\u003cp\u003eShipping and customs duties are not included.\u003c\/p\u003e","brand":"Washer Drone Shop","offers":[{"title":"30 mt - 98 ft","offer_id":46601052749858,"sku":"WD-L2-SHS-06-030","price":450.0,"currency_code":"EUR","in_stock":true},{"title":"50 mt - 164 ft","offer_id":45750026698786,"sku":"WD-L2-SHS-06-050","price":650.0,"currency_code":"EUR","in_stock":true},{"title":"100 mt - 328 ft","offer_id":45750026731554,"sku":"WD-L2-SHS-06-100","price":1200.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/1623\/0690\/files\/SkyHose-Hero.jpg?v=1787129064"},{"product_id":"skyline-4-50m-reinforced-drone-power-cable","title":"SkyLine Mono - Reinforced Drone Power Cable | WasherDrone","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eSkyLine 4 — Reinforced AC Supply Cable (up to 80 m)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003eSkyLine 4 is the single-phase AC mains\/generator supply line for next-generation WasherDrone ground systems. It connects the power source to the skid-mounted ground unit, delivering stable power across long field runs while staying flexible and abrasion-resistant for repeated reel deployment. Available in custom lengths up to 80 m.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003eBuilt around a \u003cstrong\u003e3G4 construction (3 × 4 mm² fine-stranded annealed copper, L\/N\/PE)\u003c\/strong\u003e in a heavy-duty H07RN-F class rubber sheath, the cable is rated for continuous outdoor industrial use and supports the ~15 A typical draw of single-phase WasherDrone systems.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eConductor: 3 × 4 mm² fine-stranded (Class 5) annealed copper — flexible, low-resistance\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eConstruction: 3G4 (Line \/ Neutral \/ Protective Earth)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCable type: heavy-duty rubber-sheathed, H07RN-F class\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eVoltage rating: 450\/750 V — \u003cstrong\u003esingle-phase only\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eOperating temperature: −25 °C to +60 °C\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eJacket: oil-, abrasion- and UV-resistant\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eLength: made-to-order, single continuous run up to 80 m (no inline joints)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eVoltage drop: ≈3% at 15 A over 50 m, ≈4.6% at 80 m — within the 5% limit\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCurrent: matched to the connected system (~15 A typical); \u003cstrong\u003ederate when fully wound on a reel\u003c\/strong\u003e (heat build-up)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003ePlug: Type F (Schuko), 16 A \/ 250 V\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eConnectors: IP-rated industrial plug\/coupler\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCertifications: CE; RoHS-compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This cable powers single-phase systems only. Three-phase (380 V) systems require the dedicated CEE three-phase supply cable.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003e \u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\"\u003e \u003c\/p\u003e","brand":"Washer Drone Shop","offers":[{"title":"30 mt","offer_id":45801250127906,"sku":"WD-L2-SLN-M030","price":200.0,"currency_code":"EUR","in_stock":true},{"title":"50 mt","offer_id":45801250160674,"sku":"WD-L2-SLN-M050","price":350.0,"currency_code":"EUR","in_stock":true},{"title":"80 mt","offer_id":45801250193442,"sku":"WD-L2-SLN-M080","price":600.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/1623\/0690\/files\/SkyLine4-50mReinforcedDronePowerCable.jpg?v=1767782470"},{"product_id":"skyhose-10-aramid-reinforced-drone-hose","title":"WasherDrone SkyHose 10 — 3\/8 in Aramid-Reinforced Drone Hose","description":"\u003cp\u003eThe SkyHose 10 is the high-pressure supply line between the ground system and the drone-mounted lance. It is built on a 3\/8 in aramid-reinforced hose rated at 190 bar (2,750 psi) with a 4:1 safety factor. Aramid reaches this pressure class at 102 g\/m (6.8 lb \/ 100 ft), where a textile-braided equivalent is heavier — and the aircraft lifts both the hose and the water inside it. Both ends carry a crimped union and a stainless steel quick-connect: male in, female out.\u003c\/p\u003e\n\u003cp\u003eThe drone does not do the work. The drone carries the nozzle to height. The ground system does the work.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAramid, not textile.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA single aramid braid carries 190 bar (2,750 psi) at 102 g\/m (6.8 lb \/ 100 ft) — strength-to-weight that stays airborne for the full working height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePayload you can calculate.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHose and water are published separately: 173 g per metre suspended, water included. The lifted mass is a number, not an estimate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated end to end.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe couplings are rated 300 bar (4,350 psi), above the hose itself, so the assembly is limited by the hose at 190 bar (2,750 psi) rather than by a fitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel wet path.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCouplings and unions are stainless throughout, so the line introduces no metals into water fed from a reverse-osmosis stage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eThe hose sits between the ground system outlet and the drone-mounted lance. Polarity is fixed across the WasherDrone range and follows the same logic as a power socket: water enters through a male fitting and leaves through a female one, so a line cannot be connected the wrong way round.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect at the ground:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe male inlet mates with the female outlet on the ground system — SkyJet, SkyControl, or your own pump unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun and lift:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePay the hose out from the reel as the aircraft climbs. Every extra metre aloft is lifted mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect at the lance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe female outlet receives the male inlet of the lance. Seat both couplings before pressurising.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eHose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner diameter\u003c\/td\u003e\n\u003ctd\u003e9.53 mm (3\/8 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e15 mm (0.59 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolyurethane cover, single-layer aramid braid, polyester liner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking pressure\u003c\/td\u003e\n\u003ctd\u003e190 bar (2,750 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBurst pressure\u003c\/td\u003e\n\u003ctd\u003e760 bar (11,020 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety factor\u003c\/td\u003e\n\u003ctd\u003e4:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. bend radius\u003c\/td\u003e\n\u003ctd\u003e125 mm (5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose weight\u003c\/td\u003e\n\u003ctd\u003e102 g\/m (6.8 lb \/ 100 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eAssembly and connections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd fittings\u003c\/td\u003e\n\u003ctd\u003eCrimped union, both ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInlet coupling\u003c\/td\u003e\n\u003ctd\u003eQuick-connect, male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet coupling\u003c\/td\u003e\n\u003ctd\u003eQuick-connect, female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoupling material\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoupling size\u003c\/td\u003e\n\u003ctd\u003e1\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoupling rating\u003c\/td\u003e\n\u003ctd\u003e300 bar (4,350 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembly rating\u003c\/td\u003e\n\u003ctd\u003e190 bar (2,750 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eIn service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. reel drum diameter\u003c\/td\u003e\n\u003ctd\u003e250 mm (9.9 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eDrone-based façade and exterior cleaning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eModels\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 m \/ 98 ft\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— WD-L2-SHS-10-030 (Reinforced drone hose 3\/8 in, 30 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 m \/ 164 ft\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— WD-L2-SHS-10-050 (Reinforced drone hose 3\/8 in, 50 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 m \/ 328 ft\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— WD-L2-SHS-10-100 (Reinforced drone hose 3\/8 in, 100 m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat’s included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSkyHose 10 hose assembly in the selected length\u003c\/li\u003e\n\u003cli\u003eCrimped unions, both ends\u003c\/li\u003e\n\u003cli\u003eStainless steel quick-connects — male inlet, female outlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you deploy\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe hose sets the assembly pressure.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe quick-connects are rated 300 bar (4,350 psi) and the hose 190 bar (2,750 psi), so the hose is the limiting component and the assembly rating is 190 bar (2,750 psi). Operate within that figure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRespect the bend radius.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMinimum bend radius is 125 mm (5 in), so reel drums must be at least 250 mm (9.9 in) in diameter. Tighter coiling permanently damages the reinforcement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLifted mass grows with height.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMatch the deployed length to the working height. The ground system and the lance are separate products and are not included; the lance adds its own mass in the air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore and after each run.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSeat and lock both quick-connects before the pump is started, and depressurise before disconnecting. Rinse, drain, and store coiled at or above the minimum bend radius, out of direct sunlight. Inspect the cover for abrasion at every deployment.\u003c\/p\u003e\n\u003cp\u003eShipping and customs duties are not included.\u003c\/p\u003e","brand":"Washer Drone Shop","offers":[{"title":"30 mt - 98 ft","offer_id":46601976545314,"sku":"WD-L2-SHS-10-030","price":650.0,"currency_code":"EUR","in_stock":true},{"title":"50 mt - 164 ft","offer_id":45750026272802,"sku":"WD-L2-SHS-10-050","price":900.0,"currency_code":"EUR","in_stock":true},{"title":"100 mt - 328 ft","offer_id":45750026305570,"sku":"WD-L2-SHS-10-100","price":1600.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/1623\/0690\/files\/SkyHose-Hero_a4fb133c-6f3c-447a-95aa-b424ef7837d7.jpg?v=1787130117"},{"product_id":"skynozzle-max-professional-drone-nozzle-kit","title":"SkyNozzle MAX – Professional Drone Nozzle Kit","description":"\u003cdiv\u003e\u003cspan\u003eSkyNozzle MAX – Professional Drone Nozzle Kit\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eSkyNozzle MAX is a high-performance nozzle and accessory kit designed for advanced drone-based exterior cleaning operations. Engineered for precision, flexibility, and durability, this all-in-one solution enables operators to adapt instantly to different surfaces, pressures, and cleaning requirements in the field.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e* Complete professional nozzle kit for aerial cleaning applications\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e* Multiple interchangeable spray tips for various spray angles and flow rates\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e* Precision pressure control components for optimized performance\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e* High-quality stainless steel and brass fittings for durability and corrosion resistance\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e* Quick-connect system for fast and secure assembly\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e* Includes angled lances for improved reach and complex surface access\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e* Integrated pressure gauge for real-time monitoring\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e* Compact and protective carrying case for safe transport and organization\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e* Fully compatible with SkyJet, SkyJet Pro, and WasherDrone systems\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e* Fully compatible with SkyLance (plug \u0026amp; play integration)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eDesigned for professionals who don’t want to improvise mid-air, SkyNozzle MAX ensures consistent spray performance, operational efficiency, and maximum control during high-rise cleaning operations.\u003c\/span\u003e\u003c\/div\u003e","brand":"Washer Drone Shop","offers":[{"title":"Default Title","offer_id":45076568014882,"sku":"WD-L2-NZL-PCK-MAX","price":750.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/1623\/0690\/files\/SkyNozzleMAX_ProfessionalDroneNozzleKitDetails_1d3f039e-2571-47eb-97e2-c263fb67f2eb.jpg?v=1773827867"},{"product_id":"sweepjet-turbo-nozzle-washerdrone","title":"SweepJet Turbo Nozzle — WasherDrone","description":"\u003cp\u003eThe SweepJet Turbo Nozzle is a stainless steel high-pressure nozzle that uses the flow itself to sweep a single coherent jet back and forth across a 30° arc. Unlike a rotary turbo nozzle, it contains no rotor, no bearing and no seal: the water does the work of moving the jet. The result is a fast, concentrated stream that travels across the surface like the edge of a squeegee, driving contamination off in one direction as the drone tracks horizontally or vertically. It threads onto any G1\/4\" internal fitting and is rated from 60 to 200 bar.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNothing rotates.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNo rotor, bearing or seal inside the nozzle, so there is no rotating assembly to wear, seize or need servicing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSqueegee-like action.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe swept jet clears contamination in one direction as the drone tracks across the surface, rather than scattering it from a spinning point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy into the water.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePressure energy is not spent turning a rotor; it goes into the jet leaving the orifice.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAny orientation.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBecause nothing spins, performance does not depend on how the nozzle is held — including pointing downward.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo gyroscopic load.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWith no rotating mass, the nozzle adds no spinning inertia to the airframe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel build.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCorrosion-resistant stainless steel body rated for continuous outdoor high-pressure duty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eInside the nozzle, the incoming flow is fed through a fixed internal geometry that makes the jet oscillate on its own. No component turns, so no pressure energy is spent driving a rotor — it goes into the water. The jet leaves the orifice as a fast, coherent stream and is swept across a 30° arc, producing a moving line of impact rather than a rotating point.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeed:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh-pressure water enters through the G1\/4\" internal thread at 60–200 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOscillate:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe fixed internal geometry makes the jet swing back and forth by itself — no rotating parts are involved.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweep:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe jet traverses a 30° arc; as the drone moves, the swept stream drives contamination off the surface in one direction.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eNozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eHigh-pressure sweeping jet nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpray pattern\u003c\/td\u003e\n\u003ctd\u003eSwept (oscillating) single jet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpray angle\u003c\/td\u003e\n\u003ctd\u003e30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle capacity\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNarrowest cross section\u003c\/td\u003e\n\u003ctd\u003e1.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEquivalent bore size\u003c\/td\u003e\n\u003ctd\u003e1.15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMoving parts\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking pressure\u003c\/td\u003e\n\u003ctd\u003e60 – 200 bar (~870 – 2,900 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow range\u003c\/td\u003e\n\u003ctd\u003e5.20 – 9.49 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eMechanical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eG1\/4\" (internal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e54 × 22 × 18 mm (L×W×H)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e96 g (nozzle only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtective sleeve\u003c\/td\u003e\n\u003ctd\u003ePolymer, fitted (Sleeve configuration only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eFlow rate vs. pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60 bar\u003c\/td\u003e\n\u003ctd\u003e5.20 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70 bar\u003c\/td\u003e\n\u003ctd\u003e5.61 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80 bar\u003c\/td\u003e\n\u003ctd\u003e6.00 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e90 bar\u003c\/td\u003e\n\u003ctd\u003e6.36 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100 bar\u003c\/td\u003e\n\u003ctd\u003e6.71 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e120 bar\u003c\/td\u003e\n\u003ctd\u003e7.35 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e140 bar\u003c\/td\u003e\n\u003ctd\u003e7.94 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e160 bar\u003c\/td\u003e\n\u003ctd\u003e8.49 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e180 bar\u003c\/td\u003e\n\u003ctd\u003e9.00 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e200 bar\u003c\/td\u003e\n\u003ctd\u003e9.49 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eModels\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle only\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— €350 (Stainless steel nozzle, G1\/4\" internal thread. No protective sleeve.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith sleeve\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— €410 (Same nozzle supplied with the polymer protective sleeve fitted over the body.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat’s included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSweepJet Turbo Nozzle (stainless steel body)\u003c\/li\u003e\n\u003cli\u003ePolymer protective sleeve — Sleeve configuration only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you deploy\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNot a rotary turbo nozzle.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDespite the name, nothing inside this nozzle rotates. The jet is swept by the flow itself, so there is no rotor, bearing or seal to service.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressure range.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRated for 60 to 200 bar. Operating below 60 bar will not produce the intended swept pattern; do not exceed 200 bar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProtective sleeve.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe polymer sleeve shields the nozzle body during handling and operation. It is supplied only with the Sleeve configuration and can be ordered later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAny G1\/4\" internal fitting, including the WasherDrone SkyLance M400. Match nozzle count to the flow your SkyJet ground pump unit can deliver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReaction force.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA high-pressure jet produces thrust at the nozzle. Include this in your payload and stability budget and verify it in your own configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWear.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWith no rotating assembly, the orifice is the only wear surface. Inspect it periodically and replace the nozzle when the jet pattern degrades.\u003c\/p\u003e\n\u003cp\u003eShipping and customs duties are not included.\u003c\/p\u003e","brand":"Washer Drone Shop","offers":[{"title":"Nozzle only","offer_id":46176747913250,"sku":"WD-L2-NZL-SWP-030","price":300.0,"currency_code":"EUR","in_stock":true},{"title":"With blue protective sleeve","offer_id":46176747946018,"sku":"WD-L2-NZL-SWP-030-BLU","price":340.0,"currency_code":"EUR","in_stock":true},{"title":"With black protective sleeve","offer_id":46176747978786,"sku":"WD-L2-NZL-SWP-030-BLA","price":340.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/1623\/0690\/files\/turbo-noozle.jpg?v=1778762769"},{"product_id":"jet-nozzle-pack","title":"SkyNozzle Pack — Drone Cleaning Nozzle Set | WasherDrone","description":"\u003cdiv class=\"product__description rte quick-add-hidden\"\u003e\n\u003cp\u003eSkyTips is a four-piece stainless steel nozzle set for drone-based exterior cleaning. It covers the full working range an operator meets on a façade — from a concentrated jet for stubborn deposits to a wide, low-impact rinse for glass and solar panels. All four nozzles share the same size 04 orifice and the same 1\/4” quick-connect fitting, so flow stays consistent across the set and a change-over takes seconds with no tools. SkyTips fits the SkyLance M400 airborne lance, the SkyGun, WasherDrone ground pump units, and any third-party lance or gun using the 1\/4” quick-connect standard.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull working range.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0°, 15°, 25° and 40° cover spot removal, chiselling, general cleaning and wide rinsing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent flow.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAll four nozzles are size 04, so swapping angles does not change system flow or force a pump re-check.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeconds to change.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1\/4” quick-connect plugs — no spanners, no thread sealing, no downtime on the roof.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRead at a glance.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIndustry-standard colour coding: red 0°, yellow 15°, green 25°, white 40°.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion resistant.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStainless steel construction for outdoor work and repeated exposure to water and cleaning solutions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-system fit.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWorks with the SkyLance M400, the SkyGun, WasherDrone ground pump units and third-party 1\/4” quick-connect equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eEach nozzle is a stainless steel spray tip on a 1\/4” quick-connect plug. The operator selects the angle that suits the surface and the soiling, pushes the nozzle into the coupler on the lance or gun, and releases the collar to lock it. Because every nozzle in the set carries the same size 04 orifice, flow through the system stays the same whichever angle is fitted.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelect:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePick the spray angle for the surface — narrow for spot work, wide for rinsing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePush the nozzle into the 1\/4” quick-connect coupler and release the collar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpray:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWork the surface, then swap angles as the job changes — no tools required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eSet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eDrone cleaning nozzle set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSet contents\u003c\/td\u003e\n\u003ctd\u003e4 × quick-connect spray nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpray angles\u003c\/td\u003e\n\u003ctd\u003e0°, 15°, 25°, 40°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle size\u003c\/td\u003e\n\u003ctd\u003e04 (identical across the set)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003eComplete set, or individual nozzles as spares\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eMechanical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003e1\/4” quick-connect plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChange-over\u003c\/td\u003e\n\u003ctd\u003eTool-free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour coding\u003c\/td\u003e\n\u003ctd\u003eRed 0° · yellow 15° · green 25° · white 40°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWear item\u003c\/td\u003e\n\u003ctd\u003eYes — nozzles are consumable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003ePerformance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure rating\u003c\/td\u003e\n\u003ctd\u003eMatched to WasherDrone system operating pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature rating\u003c\/td\u003e\n\u003ctd\u003eMatched to WasherDrone system operating temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage — 0°\u003c\/td\u003e\n\u003ctd\u003eConcentrated jet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage — 15°\u003c\/td\u003e\n\u003ctd\u003e≈ 79 mm at 300 mm stand-off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage — 25°\u003c\/td\u003e\n\u003ctd\u003e≈ 133 mm at 300 mm stand-off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoverage — 40°\u003c\/td\u003e\n\u003ctd\u003e≈ 218 mm at 300 mm stand-off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eModels\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkyTips — complete set\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— WD-NZL-01 (All four nozzles: 0°, 15°, 25° and 40°. The standard field kit.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0° red — spot\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— WD-NZL-01-00 (Concentrated jet for localised deposits. Controlled short-range work; see operating notes.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15° yellow — chisel\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— WD-NZL-01-15 (Narrow, high-impact fan for heavy soiling on robust surfaces such as concrete and stone.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25° green — general\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— WD-NZL-01-25 (The everyday façade angle — the usual first choice for mixed exterior surfaces.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40° white — rinse\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— WD-NZL-01-40 (Wide, low-impact fan for glass, painted surfaces, solar panels and final rinsing.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat’s included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e0° red spot nozzle\u003c\/li\u003e\n\u003cli\u003e15° yellow chisel nozzle\u003c\/li\u003e\n\u003cli\u003e25° green general-purpose nozzle\u003c\/li\u003e\n\u003cli\u003e40° white rinse nozzle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you deploy\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e0° nozzle — use with care.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe 0° red nozzle concentrates the full working pressure onto a point. It can mark or damage glass, paint, sealants and panel surfaces, and its reaction force is the highest of the four. It is intended for controlled spot work at short range, not for general airborne façade cleaning. Assess the surface first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMatch the nozzle to the pump.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNozzle size determines the pressure a given pump develops. SkyTips is supplied in size 04; confirm this suits your pump before first use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsumable.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNozzles wear with use. A worn orifice loses pressure and spray definition — replace individual nozzles rather than the whole set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck before you fly.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConfirm the nozzle is fully seated and the quick-connect collar is locked before every flight. Carry the spares you expect to need; a change-over at height is not possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponent supply.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSkyTips is supplied as a component for integration into WasherDrone systems. Conformity of the complete cleaning system is covered by that system’s own documentation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAfter use.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFlush with clean water after working with cleaning solutions, and store dry.\u003c\/p\u003e\n\u003cp\u003eShipping and customs duties are not included.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Washer Drone Shop","offers":[{"title":"Default Title","offer_id":45749610807330,"sku":"WD-L2-NZL-PCK-STD","price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/1623\/0690\/files\/Drone-Nozzle-Pack.png?v=1781016954"},{"product_id":"skyhose-8-aramid-reinforced-drone-hose","title":"WasherDrone SkyHose 8 — 5\/16 in Aramid-Reinforced Drone Hose","description":"\u003cp\u003eThe SkyHose 8 is the high-pressure supply line between the ground system and the drone-mounted lance. It is built on a 5\/16 in aramid-reinforced hose rated at 200 bar (2,900 psi) with a 4:1 safety factor. Aramid reaches this pressure class at 92 g\/m (6.2 lb \/ 100 ft), where a textile-braided equivalent is heavier — and the aircraft lifts both the hose and the water inside it. Both ends carry a crimped union and a stainless steel quick-connect: male in, female out.\u003c\/p\u003e\n\u003cp\u003eThe drone does not do the work. The drone carries the nozzle to height. The ground system does the work.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAramid, not textile.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA single aramid braid carries 200 bar (2,900 psi) at 92 g\/m (6.2 lb \/ 100 ft) — strength-to-weight that stays airborne for the full working height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePayload you can calculate.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHose and water are published separately: 142 g per metre suspended, water included. The lifted mass is a number, not an estimate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated end to end.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe couplings are rated 300 bar (4,350 psi), above the hose itself, so the assembly is limited by the hose at 200 bar (2,900 psi) rather than by a fitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel wet path.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCouplings and unions are stainless throughout, so the line introduces no metals into water fed from a reverse-osmosis stage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eThe hose sits between the ground system outlet and the drone-mounted lance. Polarity is fixed across the WasherDrone range and follows the same logic as a power socket: water enters through a male fitting and leaves through a female one, so a line cannot be connected the wrong way round.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect at the ground:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe male inlet mates with the female outlet on the ground system — SkyJet, SkyControl, or your own pump unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun and lift:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePay the hose out from the reel as the aircraft climbs. Every extra metre aloft is lifted mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect at the lance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe female outlet receives the male inlet of the lance. Seat both couplings before pressurising.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eHose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner diameter\u003c\/td\u003e\n\u003ctd\u003e7.94 mm (5\/16 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e13 mm (0.51 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolyurethane cover, single-layer aramid braid, polyester liner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking pressure\u003c\/td\u003e\n\u003ctd\u003e200 bar (2,900 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBurst pressure\u003c\/td\u003e\n\u003ctd\u003e800 bar (11,600 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety factor\u003c\/td\u003e\n\u003ctd\u003e4:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. bend radius\u003c\/td\u003e\n\u003ctd\u003e115 mm (4.6 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose weight\u003c\/td\u003e\n\u003ctd\u003e92 g\/m (6.2 lb \/ 100 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eAssembly and connections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd fittings\u003c\/td\u003e\n\u003ctd\u003eCrimped union, both ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInlet coupling\u003c\/td\u003e\n\u003ctd\u003eQuick-connect, male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet coupling\u003c\/td\u003e\n\u003ctd\u003eQuick-connect, female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoupling material\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoupling size\u003c\/td\u003e\n\u003ctd\u003e1\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoupling rating\u003c\/td\u003e\n\u003ctd\u003e300 bar (4,350 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembly rating\u003c\/td\u003e\n\u003ctd\u003e200 bar (2,900 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eIn service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. reel drum diameter\u003c\/td\u003e\n\u003ctd\u003e230 mm (9.1 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eDrone-based façade and exterior cleaning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eModels\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 m \/ 98 ft\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— WD-L2-SHS-08-030 (Reinforced drone hose 5\/16 in, 30 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 m \/ 164 ft\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— WD-L2-SHS-08-050 (Reinforced drone hose 5\/16 in, 50 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 m \/ 328 ft\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— WD-L2-SHS-08-100 (Reinforced drone hose 5\/16 in, 100 m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat’s included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSkyHose 8 hose assembly in the selected length\u003c\/li\u003e\n\u003cli\u003eCrimped unions, both ends\u003c\/li\u003e\n\u003cli\u003eStainless steel quick-connects — male inlet, female outlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you deploy\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe hose sets the assembly pressure.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe quick-connects are rated 300 bar (4,350 psi) and the hose 200 bar (2,900 psi), so the hose is the limiting component and the assembly rating is 200 bar (2,900 psi). Operate within that figure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRespect the bend radius.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMinimum bend radius is 115 mm (4.6 in), so reel drums must be at least 230 mm (9.1 in) in diameter. Tighter coiling permanently damages the reinforcement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLifted mass grows with height.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMatch the deployed length to the working height. The ground system and the lance are separate products and are not included; the lance adds its own mass in the air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore and after each run.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSeat and lock both quick-connects before the pump is started, and depressurise before disconnecting. Rinse, drain, and store coiled at or above the minimum bend radius, out of direct sunlight. Inspect the cover for abrasion at every deployment.\u003c\/p\u003e\n\u003cp\u003eShipping and customs duties are not included.\u003c\/p\u003e","brand":"Washer Drone Shop","offers":[{"title":"30 mt - 98 ft","offer_id":46601784393762,"sku":"WD-L2-SHS-08-030","price":600.0,"currency_code":"EUR","in_stock":true},{"title":"50 mt - 164 ft","offer_id":45750025420834,"sku":"WD-L2-SHS-08-050","price":800.0,"currency_code":"EUR","in_stock":true},{"title":"100 mt - 328 ft","offer_id":45750025453602,"sku":"WD-L2-SHS-08-100","price":1400.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/1623\/0690\/files\/SkyHose-Hero_b3e3a76f-50d1-4364-a1f4-6d5f1992fec3.jpg?v=1787129740"},{"product_id":"foam-nozzle-drone-foam-generating-nozzle-washerdrone","title":"Foam Nozzle — Drone Foam Generating Nozzle | WasherDrone","description":"\u003cp\u003eThe WD Foam Nozzle is a drone-mounted foam generating nozzle for aerial façade and surface cleaning. A pre-diluted cleaning solution is delivered up the supply hose and converted into a dense, clinging foam inside the nozzle itself, at the point of application. A stainless steel mesh pad inside the body does the work; three pads of different weights are supplied so the operator can tune foam density to the surface and the chemical in use. It threads onto a compatible aerial lance outlet and adds 141 g to the airborne payload.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam at the aircraft.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFoam is generated inside the nozzle at the point of application, so it does not have to survive the trip up the supply hose.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable density.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThree interchangeable stainless steel pads (3 g, 4 g, 5 g) let the operator tune foam thickness in the field.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLess chemical drift.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA clinging foam pattern reduces splash and airborne drift compared with an atomised chemical spray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLonger dwell time.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFoam holds the chemical on vertical surfaces so it can act before being rinsed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimal payload cost.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e141 g body — the nozzle adds almost nothing to the airborne mass budget.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField serviceable.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe nozzle opens for access to the mesh pad, which can be cleared with compressed air on site.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eCleaning chemical is diluted with water and metered at the ground unit, then pumped up the supply hose to the aircraft. Inside the WD Foam Nozzle the solution is forced through a stainless steel mesh pad, where turbulence expands it into a thick foam. The foam leaves the nozzle as a soft, low-velocity pattern that settles on the surface and stays there while it dwells.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDilute:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eChemical is diluted with water and supplied from the ground unit through the standard high-pressure line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelect:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFit the 3 g, 4 g or 5 g stainless steel pad to set the foam density for the surface and chemical in use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe solution passes through the mesh pad and leaves the nozzle as thick foam that clings to vertical surfaces instead of running off.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eSystem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eDrone Foam Nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eFoam generation from pre-diluted chemical solution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDrone-mounted; threads onto a compatible aerial lance outlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInlet\u003c\/td\u003e\n\u003ctd\u003e1\/4\" female thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrifice size\u003c\/td\u003e\n\u003ctd\u003e5.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eOperating limits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working pressure\u003c\/td\u003e\n\u003ctd\u003e275 bar (4,000 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. fluid temperature\u003c\/td\u003e\n\u003ctd\u003e100 °C (212 °F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated flow range\u003c\/td\u003e\n\u003ctd\u003e4–23 L\/min (1–6 GPM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003ctd\u003eWater-diluted cleaning chemical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eMechanical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle weight\u003c\/td\u003e\n\u003ctd\u003e141 g (0.31 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFoam element\u003c\/td\u003e\n\u003ctd\u003eStainless steel mesh pad, removable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePads supplied\u003c\/td\u003e\n\u003ctd\u003e3 pads — 3 g, 4 g and 5 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElement material\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat’s included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWD Foam Nozzle body (orifice 5.0)\u003c\/li\u003e\n\u003cli\u003eStainless steel foam pad, 3 g\u003c\/li\u003e\n\u003cli\u003eStainless steel foam pad, 4 g\u003c\/li\u003e\n\u003cli\u003eStainless steel foam pad, 5 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you deploy\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFlush after every application.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRinse the nozzle with clean water and remove the mesh pad at the end of each job. Cleaning chemical left on the stainless steel element will cause corrosion and shorten its service life. This is the single most important maintenance step.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRestoring foam quality.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIf foam output drops, open the nozzle, remove the mesh pad and blow it clear with compressed air. A partially blocked pad is the usual cause of thin or inconsistent foam.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePre-diluted supply required.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe nozzle does not meter or inject chemical. Dilution is carried out at the ground unit; the nozzle receives the finished solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChemical compatibility.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConfirm that the cleaning chemical is compatible with stainless steel and with the wetted materials of the rest of the system before use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWear part.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMesh pads are consumable and are replaced periodically depending on chemical, water quality and cleaning discipline.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChemical application, not rinsing.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThis is a foam applicator. High-pressure rinsing and stripping require a separate high-pressure nozzle.\u003c\/p\u003e\n\u003cp\u003eShipping and customs duties are not included.\u003c\/p\u003e","brand":"Washer Drone Shop","offers":[{"title":"Default Title","offer_id":46176537247778,"sku":"WD-L2-NZL-FOM-STD","price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/1623\/0690\/files\/FoamNozzle-Hero.jpg?v=1785708131"},{"product_id":"rotary-turbo-nozzle-045-rotating-high-pressure-nozzle-1-4-quick-connect","title":"Rotary Turbo Nozzle 045 — Rotating High-Pressure Nozzle, 1\/4\" Quick Connect","description":"\u003cp\u003eThe drone does not do the work. The drone carries the nozzle to height. The ground system does the work.\u003c\/p\u003e\n\u003cp\u003eThe Rotary Turbo Nozzle takes a concentrated 0° jet and spins it at high speed into a cone, so a single tip delivers the impact of a point jet across the coverage width of a fan. It is the tool for bonded soiling — biofilm, algae, atmospheric carbon, mineral staining — that a fixed fan tip cannot lift. The nozzle carries a 045 orifice and a standard 1\/4\" quick-connect plug, so it swaps in and out of a drone spray lance or a ground lance without tools.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact without a point jet.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe rotating 0° stream lifts bonded soiling that a 25° or 40° fan tip only wets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotating, not oscillating.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe jet traces a circle. This is a different pattern from an oscillating sweep nozzle, which moves the jet back and forth along an arc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard interface.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1\/4\" quick-connect plug — the common interface across WasherDrone lances and industry pressure equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField-swappable.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNo tools. The tip changes between passes on the same lance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefined orifice.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e045 orifice, so delivered pressure is predictable once pump flow is known.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact and light.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAdds negligible mass to a drone-mounted lance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eWater enters the nozzle body and is directed through a single 0° orifice held in a bearing seat. Flow drives the orifice around its axis, so the jet traces a cone rather than a line. The result is a moving point of high impact rather than a spread of reduced impact.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePush the 1\/4\" quick-connect plug into the lance socket until the collar locks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatch:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConfirm your pump flow sits in the intended range for a 045 orifice before use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHold a consistent standoff distance and move steadily; the rotating jet does the lifting, dwell time does not.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eNozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eRotary (turbo) high-pressure nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpray pattern\u003c\/td\u003e\n\u003ctd\u003eRotating 0° jet forming a cone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrifice size\u003c\/td\u003e\n\u003ctd\u003e045\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended flow\u003c\/td\u003e\n\u003ctd\u003eApprox. 12–13 L\/min (3.2–3.4 GPM) at 150 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eConnection \u0026amp; rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003e1\/4\" quick-connect plug (male)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working pressure\u003c\/td\u003e\n\u003ctd\u003e250 bar (3,625 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. temperature\u003c\/td\u003e\n\u003ctd\u003eTBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody material\u003c\/td\u003e\n\u003ctd\u003eTBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eSupply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHS code\u003c\/td\u003e\n\u003ctd\u003eTBC — pending customs classification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eMatching the orifice to your pump\u003c\/h2\u003e\n\u003cp\u003eOrifice size, not spray angle, determines the pressure your pump develops at the tip. Check the flow figure on your pump plate against this table before ordering.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump flow\u003c\/td\u003e\n\u003ctd\u003eResult with this orifice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8 L\/min (2.1 GPM)\u003c\/td\u003e\n\u003ctd\u003e~61 bar at the nozzle — insufficient. Use a smaller orifice.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12–13 L\/min (3.2–3.4 GPM)\u003c\/td\u003e\n\u003ctd\u003e~150 bar at the nozzle — matched. This is the intended range.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15 L\/min (4.0 GPM)\u003c\/td\u003e\n\u003ctd\u003e~214 bar at the nozzle — exceeds a 150 bar system; pump will bypass.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20 L\/min (5.3 GPM)\u003c\/td\u003e\n\u003ctd\u003eNot suitable. Use a larger orifice.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat’s included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Rotary Turbo Nozzle, 045 orifice, 1\/4\" quick-connect plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you deploy\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMatch the orifice to your pump.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOrifice size, not spray angle, determines the pressure your pump actually develops at the tip. A 045 orifice is sized for a flow of roughly 12–13 L\/min. Below that the jet loses pressure; above it, back-pressure rises and the pump goes to bypass. Check the flow figure on your pump plate before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot the same as a sweep nozzle.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA rotary nozzle spins the jet in a circle. A sweep nozzle oscillates it along an arc. They are different tools for different soiling patterns and are not interchangeable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsumable part.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe orifice and bearing seat wear with use, particularly on unfiltered or hard water. Replace when the cone opens up or rotation becomes irregular.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandoff distance.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAt close range a rotating 0° jet can mark soft substrates — painted render, timber, aged sealant. Test on an inconspicuous area first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold separately.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLance, hose, and ground pump unit are separate products and are not included.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between a rotary turbo nozzle and a sweep nozzle?\u003c\/strong\u003e\u003cbr\u003eA rotary nozzle spins a 0° jet around its axis, tracing a circle. A sweep nozzle oscillates the jet back and forth along an arc. The rotary pattern concentrates impact into a moving point; the sweep pattern distributes it along a line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich orifice size is this?\u003c\/strong\u003e\u003cbr\u003e045. This is sized for a flow of roughly 12–13 L\/min at 150 bar. Confirm your pump's rated flow before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my lance?\u003c\/strong\u003e\u003cbr\u003eIt has a standard 1\/4\" quick-connect plug, which is the common interface on WasherDrone spray lances and on most professional pressure equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat pressure is it rated for?\u003c\/strong\u003e\u003cbr\u003e250 bar (3,625 PSI) maximum working pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it on a drone-mounted lance?\u003c\/strong\u003e\u003cbr\u003eYes. It is light enough that it does not materially affect payload, and it changes over without tools between passes.\u003c\/p\u003e\n\u003ch2\u003eOrdering \u0026amp; identification\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eWD-L2-RTN-045\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHS code\u003c\/td\u003e\n\u003ctd\u003eTBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eShipping and customs duties are not included.\u003c\/p\u003e","brand":"Washer Drone Shop","offers":[{"title":"Default Title","offer_id":46384886743074,"sku":"WD-L2-RTN","price":100.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/1623\/0690\/files\/RotatingTurboNozzleIMG_6750.png?v=1786465994"},{"product_id":"adjustable-pivot-adaptor-variable-angle-nozzle-adaptor-1-4-quick-connect","title":"Adjustable Pivot Adaptor — Variable Angle Nozzle Adaptor, 1\/4\" Quick Connect","description":"\u003cp\u003eThe drone does not do the work. The drone carries the nozzle to height. The ground system does the work.\u003c\/p\u003e\n\u003cp\u003eThe Adjustable Pivot Adaptor is a brass hinged coupling that sits between the lance and the nozzle and lets the operator set the spray angle by hand instead of carrying a set of fixed-angle wands. Loosen, swing to the working angle, lock. It solves the case a bent wand cannot: surfaces whose angle changes as the work progresses up a facade.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces a set of fixed wands.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOne part covers the angles a rack of bent wands would otherwise be needed for.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjust in the field.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe angle is set by hand at the point of work, not chosen before the lift.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick connect both ends.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eInserts into an existing line without adapters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrass body.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCorrosion-resistant under chemical injection and hard water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical only.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNo electronics, no calibration, nothing to fail at height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStackable.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCombines with the Angled Extension Wand where reach and angle are both required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eThe adaptor is built as two brass halves joined on a sealed hinge with a locking collar. Released, the outlet swings through its range; tightened, it holds the set angle under working pressure.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFit the adaptor inlet to the lance outlet via the quick-connect coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRelease the collar, swing the outlet to the required angle, retighten.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerify:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBring the system to pressure and confirm the joint holds before working.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eAdjustment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eAdjustable pivoting high-pressure adaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePivot range\u003c\/td\u003e\n\u003ctd\u003eTBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocking method\u003c\/td\u003e\n\u003ctd\u003eThreaded collar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eConnection \u0026amp; rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInlet\u003c\/td\u003e\n\u003ctd\u003e1\/4\" quick connect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet\u003c\/td\u003e\n\u003ctd\u003e1\/4\" quick connect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working pressure\u003c\/td\u003e\n\u003ctd\u003e250 bar (3,625 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. temperature\u003c\/td\u003e\n\u003ctd\u003eTBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eMaterials \u0026amp; supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody material\u003c\/td\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeals\u003c\/td\u003e\n\u003ctd\u003eTBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHS code\u003c\/td\u003e\n\u003ctd\u003eTBC — pending customs classification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat’s included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Adjustable Pivot Adaptor with 1\/4\" quick-connect inlet and outlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you deploy\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRetighten before every pass.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA pivot that is not fully locked will drift under working pressure and change the point of impact mid-pass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReaction force.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAny angled outlet produces a turning moment at the coupling. On a drone-mounted lance, verify handling at low pressure first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeal wear.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe hinge seal is a wear item under chemical duty. Rinse with clean water after alkaline or acid injection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNozzle not included.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe nozzle is a separate item.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does an adjustable pivot adaptor do?\u003c\/strong\u003e\u003cbr\u003eIt sits between the lance and the nozzle and lets the operator set the spray angle by hand, then lock it, instead of swapping between fixed-angle wands.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the connections?\u003c\/strong\u003e\u003cbr\u003e1\/4\" quick connect at both the inlet and the outlet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat pressure is it rated for?\u003c\/strong\u003e\u003cbr\u003e250 bar (3,625 PSI) maximum working pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it together with an extension wand?\u003c\/strong\u003e\u003cbr\u003eYes. The wand provides reach and the adaptor provides an adjustable angle; they are commonly used together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the angle hold under pressure?\u003c\/strong\u003e\u003cbr\u003eIt holds when the locking collar is fully tightened. Retighten and verify at low pressure before each working pass.\u003c\/p\u003e\n\u003ch2\u003eOrdering \u0026amp; identification\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eWD-L2-PVA-STD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHS code\u003c\/td\u003e\n\u003ctd\u003eTBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eShipping and customs duties are not included.\u003c\/p\u003e","brand":"Washer Drone Shop","offers":[{"title":"Default Title","offer_id":46384888807458,"sku":"WD-L2-PVA","price":30.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/1623\/0690\/files\/PivotingQuickConnectCouplerIMG_6755.png?v=1786466156"},{"product_id":"angled-extension-wand-bent-high-pressure-lance-extension-1-4-quick-connect","title":"Angled Extension Wand — Bent High-Pressure Lance Extension, 1\/4\" Quick Connect","description":"\u003cp\u003eThe drone does not do the work. The drone carries the nozzle to height. The ground system does the work.\u003c\/p\u003e\n\u003cp\u003eThe Angled Extension Wand is a bent stainless steel extension that sits between the lance and the nozzle, offsetting the tip so the jet can be aimed at surfaces the lance body cannot face directly — soffits, balcony undersides, recessed reveals, the underside of a solar array. Quick-connect at both ends: it goes on and comes off without tools and without breaking the pressure line elsewhere.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccess without repositioning.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe bend puts the jet where the lance body cannot point, so the operator does not have to move the platform to change the angle of attack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoth ends quick-connect.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSocket at the inlet, plug at the outlet. It inserts into an existing line without adapters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotatable working plane.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe wand turns in the coupling, so the same part covers upward and downward work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion-resistant tube.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eStainless steel tube with a brass coupling — suited to chemical-injected and hard-water duty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdds no electronics.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePurely mechanical. Nothing to calibrate, nothing to fail electrically at height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStackable.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCombines with the Adjustable Pivot Adaptor when the required angle is not fixed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eThe wand's quick-connect socket accepts the lance outlet; the nozzle fits the plug at the far end. The fixed bend moves the tip off the lance axis, so the operator can hold the lance in a comfortable position while the jet meets the surface at an angle that would otherwise require repositioning the whole aircraft or lance.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePush the wand socket onto the lance outlet until the collar locks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit tip:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePush a quick-connect nozzle into the plug end of the wand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAim:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRotate the wand in the coupling to set the working plane, then lock.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eGeometry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eAngled high-pressure extension wand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall length\u003c\/td\u003e\n\u003ctd\u003eTBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBend angle\u003c\/td\u003e\n\u003ctd\u003eTBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube diameter\u003c\/td\u003e\n\u003ctd\u003eTBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eConnection \u0026amp; rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInlet\u003c\/td\u003e\n\u003ctd\u003e1\/4\" quick-connect socket (female)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet\u003c\/td\u003e\n\u003ctd\u003e1\/4\" quick-connect plug (male)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working pressure\u003c\/td\u003e\n\u003ctd\u003e250 bar (3,625 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. temperature\u003c\/td\u003e\n\u003ctd\u003eTBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eMaterials \u0026amp; supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube material\u003c\/td\u003e\n\u003ctd\u003eStainless steel (grade TBC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoupling material\u003c\/td\u003e\n\u003ctd\u003eBrass (TBC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHS code\u003c\/td\u003e\n\u003ctd\u003eTBC — pending customs classification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat’s included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Angled Extension Wand with 1\/4\" quick-connect socket and plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you deploy\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNozzle not included.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe wand carries a quick-connect plug at the outlet; the nozzle is a separate item.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReaction force.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAn offset tip produces a turning moment at the coupling. On a drone-mounted lance this changes the reaction the aircraft has to hold. Verify handling at low pressure before committing to a full working pass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLock before pressurising.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConfirm both quick-connect collars are fully seated. A partially engaged coupling separates under pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRinse after chemical use.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFlush with clean water after alkaline or acid injection to protect the coupling seals.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is an angled extension wand used for?\u003c\/strong\u003e\u003cbr\u003eIt offsets the nozzle from the lance axis so the jet can reach surfaces the lance cannot point at directly — soffits, balcony undersides, recessed reveals, and the underside of solar arrays.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the connections?\u003c\/strong\u003e\u003cbr\u003eA 1\/4\" quick-connect socket at the inlet and a 1\/4\" quick-connect plug at the outlet, so it inserts into a standard line without adapters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with a nozzle?\u003c\/strong\u003e\u003cbr\u003eNo. The nozzle is a separate item and fits the quick-connect plug at the outlet end.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat pressure is it rated for?\u003c\/strong\u003e\u003cbr\u003e250 bar (3,625 PSI) maximum working pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used on a drone lance?\u003c\/strong\u003e\u003cbr\u003eYes, but an offset tip produces a turning moment at the coupling. Verify handling at low pressure before a full working pass.\u003c\/p\u003e\n\u003ch2\u003eOrdering \u0026amp; identification\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eWD-L2-WND-STD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHS code\u003c\/td\u003e\n\u003ctd\u003eTBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eShipping and customs duties are not included.\u003c\/p\u003e","brand":"Washer Drone Shop","offers":[{"title":"30","offer_id":46384892346402,"sku":"WD-L2-WND-30","price":20.0,"currency_code":"EUR","in_stock":false},{"title":"45","offer_id":46384892379170,"sku":"WD-L2-WND-45","price":20.0,"currency_code":"EUR","in_stock":false},{"title":"30 + 45","offer_id":46384892411938,"sku":"WD-L2-WND-TWN","price":35.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/1623\/0690\/files\/AngledExtensionWandIMG_6769.png?v=1786467351"},{"product_id":"quick-connect-fitting-set-1-4-high-pressure-coupler-socket-plug-kit-_","title":"Quick Connect Fitting Set — 1\/4\" High-Pressure Coupler, Socket \u0026 Plug Kit","description":"\u003cp\u003eThe drone does not do the work. The drone carries the nozzle to height. The ground system does the work.\u003c\/p\u003e\n\u003cp\u003eA set of 1\/4\" quick-connect couplers, a socket, and a plug — the small brass and stainless parts that join a high-pressure line together and that are the first things to be lost, dropped, or worn out on site. Kept as a set in the van, a damaged coupling costs a minute instead of a day.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDowntime insurance.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA single failed coupling stops a whole crew. The set turns that into a one-minute swap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard 1\/4\" interface.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMatches the quick-connect interface used across WasherDrone lances, nozzles, and hoses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-pressure rated.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e250 bar (3,625 PSI) maximum working pressure — not a garden-duty fitting set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion-resistant.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBrass and stainless construction, suited to chemical-injected and hard-water duty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool-free connection.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePush and lock. No threading, no sealant, no wrench.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne SKU, not five.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOrdered and stocked as a single line item.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eQuick-connect fittings join a high-pressure line without threading: a plug pushes into a socket and a sprung collar locks it. The set covers the standard combinations needed to terminate a hose, adapt a threaded outlet, and add or remove a tool from the line.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdentify:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMatch the fitting to the connection you are replacing — socket, plug, or threaded coupler.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSeat the fitting fully and confirm the collar has sprung back to the locked position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBring the line to working pressure and check for leakage before use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eSet contents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuick-connect couplers\u003c\/td\u003e\n\u003ctd\u003e2 × (thread standard TBC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuick-release coupling\u003c\/td\u003e\n\u003ctd\u003e1 × 1\/4\" socket (female)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuick-release plug\u003c\/td\u003e\n\u003ctd\u003e1 × 1\/4\" plug (male, threaded end TBC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eRating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003e1\/4\" quick connect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working pressure\u003c\/td\u003e\n\u003ctd\u003e250 bar (3,625 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. temperature\u003c\/td\u003e\n\u003ctd\u003eTBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eMaterials \u0026amp; supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eBrass and stainless steel (grades TBC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeals\u003c\/td\u003e\n\u003ctd\u003eTBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHS code\u003c\/td\u003e\n\u003ctd\u003eTBC — pending customs classification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat’s included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 × quick-connect coupler\u003c\/li\u003e\n\u003cli\u003e1 × 1\/4\" quick-release coupling (socket)\u003c\/li\u003e\n\u003cli\u003e1 × 1\/4\" quick-release plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you deploy\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eConfirm the thread before ordering.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe threaded ends on the couplers follow a specific standard. Check the connection on your equipment against the specification above, or ask us before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeals are consumable.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eO-rings harden and split with chemical exposure and UV. Inspect at each fitting and replace the seal rather than the whole coupling where possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLock before pressurising.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA partially engaged quick connect separates under pressure. Confirm the collar has sprung fully back.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot a repair of a rated assembly.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThese are replacement fittings for like-for-like restoration of an existing line. They are not intended for building a new pressure assembly to a different specification.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is in the set?\u003c\/strong\u003e\u003cbr\u003eTwo quick-connect couplers, one 1\/4\" quick-release socket, and one 1\/4\" quick-release plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat pressure are the fittings rated for?\u003c\/strong\u003e\u003cbr\u003e250 bar (3,625 PSI) maximum working pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit my hose?\u003c\/strong\u003e\u003cbr\u003eThey use the standard 1\/4\" quick-connect interface. The threaded ends follow a specific standard — check the specification against your equipment, or ask us before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the seals replaceable?\u003c\/strong\u003e\u003cbr\u003eYes. O-rings are the usual wear point and should be inspected regularly, particularly where chemical injection is used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy buy these as a set?\u003c\/strong\u003e\u003cbr\u003eA single failed coupling stops the whole operation, and the individual parts are the ones most often lost on site. A set kept on the vehicle turns a lost day into a one-minute swap.\u003c\/p\u003e\n\u003ch2\u003eOrdering \u0026amp; identification\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eWD-L3-QCF-STD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHS code\u003c\/td\u003e\n\u003ctd\u003eTBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eShipping and customs duties are not included.\u003c\/p\u003e","brand":"Washer Drone Shop","offers":[{"title":"4-Pack Quick Connect Set","offer_id":46384951558178,"sku":"WD-L3-QCF-4PK","price":12.0,"currency_code":"EUR","in_stock":false},{"title":"2-Pack Male Quick Connect Set","offer_id":46384951590946,"sku":"WD-L3-QCF-2ML","price":11.0,"currency_code":"EUR","in_stock":false},{"title":"2-Pack Female Quick Connect Set","offer_id":46384896147490,"sku":"WD-L3-QCF-2FM","price":11.0,"currency_code":"EUR","in_stock":false},{"title":"Male Quick Connect Plug","offer_id":46384896180258,"sku":"WD-L3-QCF-MQP","price":6.0,"currency_code":"EUR","in_stock":false},{"title":"Female Quick Connect Plug","offer_id":46384896213026,"sku":"WD-L3-QCF-FQP","price":6.0,"currency_code":"EUR","in_stock":false},{"title":"Male Quick Coupler","offer_id":46384896245794,"sku":"WD-L3-QCF-MQC","price":6.0,"currency_code":"EUR","in_stock":false},{"title":"Female Quick Coupler","offer_id":46384951623714,"sku":"WD-L3-QCF-FQC","price":6.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/1623\/0690\/files\/Pressure_Washer_Quick_Connect_Adapter_Set_IMG_6741.png?v=1786467641"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/1623\/0690\/collections\/SkyNozzleMAX_ProfessionalDroneNozzleKit_2adcc32d-7574-4641-9f12-a5ab4fcaf845.jpg?v=1786361640","url":"https:\/\/shop.washerdrone.com\/collections\/accessories.oembed","provider":"Washer Drone Shop","version":"1.0","type":"link"}