{"product_id":"rotary-turbo-nozzle-045-rotating-high-pressure-nozzle-1-4-quick-connect","title":"Rotary Turbo Nozzle 045 — Rotating High-Pressure Nozzle, 1\/4\" Quick Connect","description":"\u003cp\u003eThe drone does not do the work. The drone carries the nozzle to height. The ground system does the work.\u003c\/p\u003e\n\u003cp\u003eThe Rotary Turbo Nozzle takes a concentrated 0° jet and spins it at high speed into a cone, so a single tip delivers the impact of a point jet across the coverage width of a fan. It is the tool for bonded soiling — biofilm, algae, atmospheric carbon, mineral staining — that a fixed fan tip cannot lift. The nozzle carries a 045 orifice and a standard 1\/4\" quick-connect plug, so it swaps in and out of a drone spray lance or a ground lance without tools.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact without a point jet.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe rotating 0° stream lifts bonded soiling that a 25° or 40° fan tip only wets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotating, not oscillating.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe jet traces a circle. This is a different pattern from an oscillating sweep nozzle, which moves the jet back and forth along an arc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard interface.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1\/4\" quick-connect plug — the common interface across WasherDrone lances and industry pressure equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField-swappable.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNo tools. The tip changes between passes on the same lance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefined orifice.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e045 orifice, so delivered pressure is predictable once pump flow is known.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact and light.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAdds negligible mass to a drone-mounted lance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eWater enters the nozzle body and is directed through a single 0° orifice held in a bearing seat. Flow drives the orifice around its axis, so the jet traces a cone rather than a line. The result is a moving point of high impact rather than a spread of reduced impact.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePush the 1\/4\" quick-connect plug into the lance socket until the collar locks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatch:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConfirm your pump flow sits in the intended range for a 045 orifice before use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHold a consistent standoff distance and move steadily; the rotating jet does the lifting, dwell time does not.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eNozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eRotary (turbo) high-pressure nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpray pattern\u003c\/td\u003e\n\u003ctd\u003eRotating 0° jet forming a cone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrifice size\u003c\/td\u003e\n\u003ctd\u003e045\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended flow\u003c\/td\u003e\n\u003ctd\u003eApprox. 12–13 L\/min (3.2–3.4 GPM) at 150 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eConnection \u0026amp; rating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003e1\/4\" quick-connect plug (male)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. working pressure\u003c\/td\u003e\n\u003ctd\u003e250 bar (3,625 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. temperature\u003c\/td\u003e\n\u003ctd\u003eTBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody material\u003c\/td\u003e\n\u003ctd\u003eTBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eSupply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHS code\u003c\/td\u003e\n\u003ctd\u003eTBC — pending customs classification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eMatching the orifice to your pump\u003c\/h2\u003e\n\u003cp\u003eOrifice size, not spray angle, determines the pressure your pump develops at the tip. Check the flow figure on your pump plate against this table before ordering.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump flow\u003c\/td\u003e\n\u003ctd\u003eResult with this orifice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8 L\/min (2.1 GPM)\u003c\/td\u003e\n\u003ctd\u003e~61 bar at the nozzle — insufficient. Use a smaller orifice.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12–13 L\/min (3.2–3.4 GPM)\u003c\/td\u003e\n\u003ctd\u003e~150 bar at the nozzle — matched. This is the intended range.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15 L\/min (4.0 GPM)\u003c\/td\u003e\n\u003ctd\u003e~214 bar at the nozzle — exceeds a 150 bar system; pump will bypass.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20 L\/min (5.3 GPM)\u003c\/td\u003e\n\u003ctd\u003eNot suitable. Use a larger orifice.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhat’s included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Rotary Turbo Nozzle, 045 orifice, 1\/4\" quick-connect plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you deploy\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMatch the orifice to your pump.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOrifice size, not spray angle, determines the pressure your pump actually develops at the tip. A 045 orifice is sized for a flow of roughly 12–13 L\/min. Below that the jet loses pressure; above it, back-pressure rises and the pump goes to bypass. Check the flow figure on your pump plate before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot the same as a sweep nozzle.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA rotary nozzle spins the jet in a circle. A sweep nozzle oscillates it along an arc. They are different tools for different soiling patterns and are not interchangeable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsumable part.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe orifice and bearing seat wear with use, particularly on unfiltered or hard water. Replace when the cone opens up or rotation becomes irregular.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandoff distance.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAt close range a rotating 0° jet can mark soft substrates — painted render, timber, aged sealant. Test on an inconspicuous area first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold separately.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eLance, hose, and ground pump unit are separate products and are not included.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between a rotary turbo nozzle and a sweep nozzle?\u003c\/strong\u003e\u003cbr\u003eA rotary nozzle spins a 0° jet around its axis, tracing a circle. A sweep nozzle oscillates the jet back and forth along an arc. The rotary pattern concentrates impact into a moving point; the sweep pattern distributes it along a line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich orifice size is this?\u003c\/strong\u003e\u003cbr\u003e045. This is sized for a flow of roughly 12–13 L\/min at 150 bar. Confirm your pump's rated flow before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my lance?\u003c\/strong\u003e\u003cbr\u003eIt has a standard 1\/4\" quick-connect plug, which is the common interface on WasherDrone spray lances and on most professional pressure equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat pressure is it rated for?\u003c\/strong\u003e\u003cbr\u003e250 bar (3,625 PSI) maximum working pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it on a drone-mounted lance?\u003c\/strong\u003e\u003cbr\u003eYes. It is light enough that it does not materially affect payload, and it changes over without tools between passes.\u003c\/p\u003e\n\u003ch2\u003eOrdering \u0026amp; identification\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eWD-L2-RTN-045\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHS code\u003c\/td\u003e\n\u003ctd\u003eTBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eShipping and customs duties are not included.\u003c\/p\u003e","brand":"Washer Drone Shop","offers":[{"title":"Default Title","offer_id":46384886743074,"sku":"WD-L2-RTN","price":100.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/1623\/0690\/files\/RotatingTurboNozzleIMG_6750.png?v=1786465994","url":"https:\/\/shop.washerdrone.com\/products\/rotary-turbo-nozzle-045-rotating-high-pressure-nozzle-1-4-quick-connect","provider":"Washer Drone Shop","version":"1.0","type":"link"}