{"product_id":"skyhose-6-aramid-reinforced-drone-hose","title":"WasherDrone SkyHose 6 — 1\/4 in Aramid-Reinforced Drone Hose","description":"\u003cp\u003eThe SkyHose 6 is the high-pressure supply line between the ground system and the drone-mounted lance. It is built on a 1\/4 in aramid-reinforced hose rated at 225 bar (3,260 psi) with a 4:1 safety factor. Aramid reaches this pressure class at 82 g\/m (5.5 lb \/ 100 ft), where a textile-braided equivalent is heavier — and the aircraft lifts both the hose and the water inside it. Both ends carry a crimped union and a stainless steel quick-connect: male in, female out.\u003c\/p\u003e\n\u003cp\u003eThe drone does not do the work. The drone carries the nozzle to height. The ground system does the work.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAramid, not textile.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA single aramid braid carries 225 bar (3,260 psi) at 82 g\/m (5.5 lb \/ 100 ft) — strength-to-weight that stays airborne for the full working height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePayload you can calculate.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHose and water are published separately: 114 g per metre suspended, water included. The lifted mass is a number, not an estimate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated end to end.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe couplings are rated 300 bar (4,350 psi), above the hose itself, so the assembly is limited by the hose at 225 bar (3,260 psi) rather than by a fitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel wet path.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCouplings and unions are stainless throughout, so the line introduces no metals into water fed from a reverse-osmosis stage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eThe hose sits between the ground system outlet and the drone-mounted lance. Polarity is fixed across the WasherDrone range and follows the same logic as a power socket: water enters through a male fitting and leaves through a female one, so a line cannot be connected the wrong way round.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect at the ground:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe male inlet mates with the female outlet on the ground system — SkyJet, SkyControl, or your own pump unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun and lift:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePay the hose out from the reel as the aircraft climbs. Every extra metre aloft is lifted mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnect at the lance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe female outlet receives the male inlet of the lance. Seat both couplings before pressurising.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eHose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner diameter\u003c\/td\u003e\n\u003ctd\u003e6.35 mm (1\/4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter diameter\u003c\/td\u003e\n\u003ctd\u003e11.4 mm (0.45 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePolyurethane cover, single-layer aramid braid, polyester liner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking pressure\u003c\/td\u003e\n\u003ctd\u003e225 bar (3,260 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBurst pressure\u003c\/td\u003e\n\u003ctd\u003e900 bar (13,050 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety factor\u003c\/td\u003e\n\u003ctd\u003e4:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. bend radius\u003c\/td\u003e\n\u003ctd\u003e100 mm (4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHose weight\u003c\/td\u003e\n\u003ctd\u003e82 g\/m (5.5 lb \/ 100 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eAssembly and connections\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd fittings\u003c\/td\u003e\n\u003ctd\u003eCrimped union, both ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInlet coupling\u003c\/td\u003e\n\u003ctd\u003eQuick-connect, male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet coupling\u003c\/td\u003e\n\u003ctd\u003eQuick-connect, female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoupling material\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoupling size\u003c\/td\u003e\n\u003ctd\u003e1\/4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoupling rating\u003c\/td\u003e\n\u003ctd\u003e300 bar (4,350 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembly rating\u003c\/td\u003e\n\u003ctd\u003e225 bar (3,260 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eIn service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. reel drum diameter\u003c\/td\u003e\n\u003ctd\u003e200 mm (7.9 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eDrone-based façade and exterior cleaning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eModels\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 m \/ 98 ft\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— WD-L2-SHS-06-030 (Reinforced drone hose 1\/4 in, 30 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 m \/ 164 ft\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— WD-L2-SHS-06-050 (Reinforced drone hose 1\/4 in, 50 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 m \/ 328 ft\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— WD-L2-SHS-06-100 (Reinforced drone hose 1\/4 in, 100 m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat’s included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSkyHose 6 hose assembly in the selected length\u003c\/li\u003e\n\u003cli\u003eCrimped unions, both ends\u003c\/li\u003e\n\u003cli\u003eStainless steel quick-connects — male inlet, female outlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you deploy\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe hose sets the assembly pressure.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe quick-connects are rated 300 bar (4,350 psi) and the hose 225 bar (3,260 psi), so the hose is the limiting component and the assembly rating is 225 bar (3,260 psi). Operate within that figure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRespect the bend radius.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMinimum bend radius is 100 mm (4 in), so reel drums must be at least 200 mm (7.9 in) in diameter. Tighter coiling permanently damages the reinforcement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLifted mass grows with height.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMatch the deployed length to the working height. The ground system and the lance are separate products and are not included; the lance adds its own mass in the air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBefore and after each run.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSeat and lock both quick-connects before the pump is started, and depressurise before disconnecting. Rinse, drain, and store coiled at or above the minimum bend radius, out of direct sunlight. Inspect the cover for abrasion at every deployment.\u003c\/p\u003e\n\u003cp\u003eShipping and customs duties are not included.\u003c\/p\u003e","brand":"Washer Drone Shop","offers":[{"title":"30 mt - 98 ft","offer_id":46601052749858,"sku":"WD-L2-SHS-06-030","price":450.0,"currency_code":"EUR","in_stock":true},{"title":"50 mt - 164 ft","offer_id":45750026698786,"sku":"WD-L2-SHS-06-050","price":650.0,"currency_code":"EUR","in_stock":true},{"title":"100 mt - 328 ft","offer_id":45750026731554,"sku":"WD-L2-SHS-06-100","price":1200.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/1623\/0690\/files\/SkyHose-Hero.jpg?v=1787129064","url":"https:\/\/shop.washerdrone.com\/products\/skyhose-6-aramid-reinforced-drone-hose","provider":"Washer Drone Shop","version":"1.0","type":"link"}