{"product_id":"sweepjet-turbo-nozzle-washerdrone","title":"SweepJet Turbo Nozzle — WasherDrone","description":"\u003cp\u003eThe SweepJet Turbo Nozzle is a stainless steel high-pressure nozzle that uses the flow itself to sweep a single coherent jet back and forth across a 30° arc. Unlike a rotary turbo nozzle, it contains no rotor, no bearing and no seal: the water does the work of moving the jet. The result is a fast, concentrated stream that travels across the surface like the edge of a squeegee, driving contamination off in one direction as the drone tracks horizontally or vertically. It threads onto any G1\/4\" internal fitting and is rated from 60 to 200 bar.\u003c\/p\u003e\n\u003ch2\u003eKey benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNothing rotates.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNo rotor, bearing or seal inside the nozzle, so there is no rotating assembly to wear, seize or need servicing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSqueegee-like action.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe swept jet clears contamination in one direction as the drone tracks across the surface, rather than scattering it from a spinning point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy into the water.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePressure energy is not spent turning a rotor; it goes into the jet leaving the orifice.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAny orientation.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBecause nothing spins, performance does not depend on how the nozzle is held — including pointing downward.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo gyroscopic load.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWith no rotating mass, the nozzle adds no spinning inertia to the airframe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel build.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCorrosion-resistant stainless steel body rated for continuous outdoor high-pressure duty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eInside the nozzle, the incoming flow is fed through a fixed internal geometry that makes the jet oscillate on its own. No component turns, so no pressure energy is spent driving a rotor — it goes into the water. The jet leaves the orifice as a fast, coherent stream and is swept across a 30° arc, producing a moving line of impact rather than a rotating point.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeed:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eHigh-pressure water enters through the G1\/4\" internal thread at 60–200 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOscillate:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe fixed internal geometry makes the jet swing back and forth by itself — no rotating parts are involved.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweep:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe jet traverses a 30° arc; as the drone moves, the swept stream drives contamination off the surface in one direction.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eNozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eHigh-pressure sweeping jet nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpray pattern\u003c\/td\u003e\n\u003ctd\u003eSwept (oscillating) single jet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpray angle\u003c\/td\u003e\n\u003ctd\u003e30°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNozzle capacity\u003c\/td\u003e\n\u003ctd\u003e30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNarrowest cross section\u003c\/td\u003e\n\u003ctd\u003e1.00 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEquivalent bore size\u003c\/td\u003e\n\u003ctd\u003e1.15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMoving parts\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking pressure\u003c\/td\u003e\n\u003ctd\u003e60 – 200 bar (~870 – 2,900 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlow range\u003c\/td\u003e\n\u003ctd\u003e5.20 – 9.49 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eMechanical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eG1\/4\" (internal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e54 × 22 × 18 mm (L×W×H)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e96 g (nozzle only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtective sleeve\u003c\/td\u003e\n\u003ctd\u003ePolymer, fitted (Sleeve configuration only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003eFlow rate vs. pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60 bar\u003c\/td\u003e\n\u003ctd\u003e5.20 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70 bar\u003c\/td\u003e\n\u003ctd\u003e5.61 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80 bar\u003c\/td\u003e\n\u003ctd\u003e6.00 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e90 bar\u003c\/td\u003e\n\u003ctd\u003e6.36 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100 bar\u003c\/td\u003e\n\u003ctd\u003e6.71 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e120 bar\u003c\/td\u003e\n\u003ctd\u003e7.35 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e140 bar\u003c\/td\u003e\n\u003ctd\u003e7.94 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e160 bar\u003c\/td\u003e\n\u003ctd\u003e8.49 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e180 bar\u003c\/td\u003e\n\u003ctd\u003e9.00 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e200 bar\u003c\/td\u003e\n\u003ctd\u003e9.49 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eModels\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNozzle only\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— €350 (Stainless steel nozzle, G1\/4\" internal thread. No protective sleeve.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith sleeve\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— €410 (Same nozzle supplied with the polymer protective sleeve fitted over the body.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat’s included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSweepJet Turbo Nozzle (stainless steel body)\u003c\/li\u003e\n\u003cli\u003ePolymer protective sleeve — Sleeve configuration only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you deploy\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNot a rotary turbo nozzle.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDespite the name, nothing inside this nozzle rotates. The jet is swept by the flow itself, so there is no rotor, bearing or seal to service.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressure range.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRated for 60 to 200 bar. Operating below 60 bar will not produce the intended swept pattern; do not exceed 200 bar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProtective sleeve.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe polymer sleeve shields the nozzle body during handling and operation. It is supplied only with the Sleeve configuration and can be ordered later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAny G1\/4\" internal fitting, including the WasherDrone SkyLance M400. Match nozzle count to the flow your SkyJet ground pump unit can deliver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReaction force.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eA high-pressure jet produces thrust at the nozzle. Include this in your payload and stability budget and verify it in your own configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWear.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWith no rotating assembly, the orifice is the only wear surface. Inspect it periodically and replace the nozzle when the jet pattern degrades.\u003c\/p\u003e\n\u003cp\u003eShipping and customs duties are not included.\u003c\/p\u003e","brand":"Washer Drone Shop","offers":[{"title":"Nozzle only","offer_id":46176747913250,"sku":"WD-L2-NZL-SJ30","price":350.0,"currency_code":"EUR","in_stock":true},{"title":"With blue protective sleeve","offer_id":46176747946018,"sku":"WD-L2-NZL-SJ30-BLU","price":410.0,"currency_code":"EUR","in_stock":true},{"title":"With black protective sleeve","offer_id":46176747978786,"sku":"WD-L2-NZL-SJ30-BLA","price":410.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0823\/1623\/0690\/files\/turbo-noozle.jpg?v=1778762769","url":"https:\/\/shop.washerdrone.com\/products\/sweepjet-turbo-nozzle-washerdrone","provider":"Washer Drone Shop","version":"1.0","type":"link"}